Operation - Dometic 9600023541 Installation And Operating Manual

Operation

Command
UP
MY
DOWN
5.4 Adding and deleting transmitters
Up to 36 transmitters from the Somfy Telis range can be connected to the con-
troller using the program button (fig. 1 5).
5.4.1 Adding transmitters
1. Press and hold the program button (fig. 1 5) for 2 seconds until the
receiver LED lights up briefly.
2. Within 2 minutes press the Prog button on the back of the transmitter.
✔ The receiver LED (fig. 1 4) flashes 7 times to confirm that the transmitter has
been added.
Repeat this process for further transmitters.
5.4.2 Deleting transmitters
1. Press and hold the program button (fig. 1 5) for 2 seconds until the
receiver LED (fig. 1 4) lights up briefly.
2. Within 2 minutes press the Prog button on the back of the transmitter.
✔ The receiver LED (fig. 1 4) flashes 7 times to confirm that the transmitter has
been deleted.
Repeat this process for further transmitters.
➤ To delete all transmitters on the system, press and hold the program button
(fig. 1 5) for approx. 7 seconds.
✔ After 2 seconds the receiver LED (fig. 1 4) lights up continuously.
✔ The receiver LED (fig. 1 4) flashes 1 time to confirm that all transmitters have
been deleted.
6 Operation
➤ Press the UP button to move both blinds to the up position.
8
DIP 8
OFF
DNC mode (for window blinds)
Motor 1 Motor 2
UP UP
DOWN UP
DOWN DOWN
Day/Night controller
ON
RFB mode (for roof blinds)
Motor 1 Motor 2
UP DOWN
DOWN DOWN
UP UP
EN