Dodge R1500 1999 Service Manual page 318

replace CTM.
VERIFICATION TEST VER-1A
BODY VERIFICATION TEST
1) Reconnect all previously disconnected components and
connectors. Turn ignition on. If entry module was replaced, program
all RKE transmitters and program other options as necessary.
2) Ensure ignition is on. Erase all DTCs using scan tool.
Turn ignition off and wait 5 seconds. Turn ignition on and fully
operate system that was malfunctioning.
3) If system is not operating properly, go to SYMPTOM
IDENTIFICATION. If system is operating correctly and customer's
complaint cannot be duplicated, repair is complete.