3) Install cable guide and drum into new window motor. To
install drum onto window motor shaft, a slight rotation of drum may be
necessary.
4) Using needle nose pliers, rotate drum. If drum still does
not align with motor shaft, with aid of an assistant, lower window
glass 1-2 inches. Drum will rotate when glass is lowered.
5) Install cover plate onto window motor. Connect window
motor connector. Remove tape holding window in place. Test window
operation. To complete installation, reverse removal procedure.
Fig. 7:
Removing Power Window Motor (Caravan, Town & Country, &
Voyager)
Courtesy of Chrysler Corp.
NOTE:
On Dakota and Durango, power window motor is integral to