Dodge R1500 1999 Service Manual page 1573

control arm pivot bolt mounting bracket to raise front end. To raise
rear end, position jack under rear axle, next to leaf spring mount.
See Fig. 3.
2) On 4WD models, raise front end by placing floor jack under
as shown. See Fig. 3 or 4. To raise rear end, place floor jack under
rear axle, next to leaf spring mount. Support vehicle with jackstands
at front and rear ends of frame.
Fig. 3: Identifying Hoisting & Jacking Locations (Dakota & Ram
Pickup)
Courtesy of Chrysler Corp.