Dodge R1500 1999 Service Manual page 1510

Fig. 1: Identifying Typical Transfer Case Shift Linkage Components
Courtesy of Chrysler Corp.
Ram Pickup
1) Place transfer case shift lever in 2H position. Use wire
or bungie cord to secure transfer case shift lever in 2H position.
2) Raise and support vehicle. Loosen lock bolt at adjusting
swivel on shift rod. See Fig. 1. Ensure shift rod slides freely in
adjusting swivel. If shift rod fails to slide freely in adjusting
swivel, lubricate shift rod as necessary.
3) Ensure shift lever on transfer case is still in 2H
position. Lower vehicle. Position shift lever so that distance from
instrument panel to 2H position dot in shift lever insert is 5.75 in.
(146.000 mm). Tighten lock bolt to 90 INCH lbs. (10 N.m). Check shift
linkage operation.