4.5 Set-up commands
M
By pressing the
button in the window for parameter selection you enter the
(see Figure 4-4).
The operations that may be performed by the user
calibration.
Checks and verifies the output power;
language setting
other...);
volume setup for sounds produced during
on 8
levels;
display contrast adjustment.
The other parameters shown on the display are used by
The vertical arrows are used for selecting a row, the horizontal ones to change a parameter
OK
(press
to confirm the change,
volatile memory, so they are valid for subsequent use.
Easytech s.r.l. – User Manual T CaRe Compact
Figure 4-4 – Set-Up Menu
(Italian,
English, French, German, Spanish, Dutch, Portuguese,
ESC
to exit). The modified parameters are stored in non-
are:
treatment.
The adjustment can be made
Easytech
service.
rev. D
set-up
menu
Pag. 25 di 36