Using T Care Compact; Knob For Power Adjust; Operations With User Interface - easytech T CaRe Compact User Manual

4.

USING T CARE COMPACT

For the correct use of the device it is necessary to:
1. Select the capacitive (CAP) or resistive (RES) operational mode
2. Programming the functional parameters
3. Connect the electrodes to be applied on the area to be treated.
The operating parameters can be set manually from the operator interface (
Recommended treatment parameters for some of the most common pathologies can be
found in the following Table:
PATOLOGY
LOW BACK PAIN
LUMBAR
HERNIATED DISC
EPICONDYLITIS
GONARTROSIS
ACUTE
ACHILLES
TENDINOPATHY
CHRONIC
ACHILLES
TENDINOPATHY
Energy delivery can be made in two way:
1) Continuous
2) Pulsed (500 kHz)

4.1 Knob for power adjust

Using the knob on the front
be delivered (in % of maximum value); the changed value is shown on the display.
On the knob there is also a key for

4.2 Operations with user interface

When the device is switched-on, for about 2 seconds the logo
CaRe Compact
are displayed.
Easytech s.r.l. – User Manual T CaRe Compact
DURATION MODALITY
CAP 50%- RES
20 MIN
50%
CAP 50%- RES
20 MIN
50%
CAP 50%- RES
20 MIN
50%
CAP 50%- RES
20 MIN
50%
15-20 MIN CAP 100%
CAP 50%- RES
15-20 MIN
50%
panel, you can increase
start / pause
FREQUENCY
500 KHz
500 KHz
500 KHz
500 KHz
500 KHz
500 KHz
or decrease the value of the power to
command.
Easytech
rev. D
touch-screen
).
POWER
CAP 30-40%
RES 25-35%
CAP 20-30%
RES 10-15%
CAP 20-25%
RES 15-20%
CAP 20-30%
RES 15-25%
5-10%
CAP 25-35%
RES 20-35%
T
and indication
Pag. 21 di 36