Electrodes - easytech T CaRe Compact User Manual

3.2 Electrodes

It is necessary to use a reference electrode (fixed or movable) to treat with
and an active electrode of the resistive or capacitive type.
The movable electrode to be used should be applied on a handpiece which is connected to
the control unit through a cable and a connector: in order to prevent the incorrect assembly
of the electrodes, the threads of the handpieces differ depending on the type.
The electrodes for capacitive type applications have the surface coated with insulating
material, while fixed electrodes and the resistive electrodes have a conductive surface.
EasyTech provides electrodes of different shape and size.
- Resistive electrodes:
a) circular electrodes with a flat surface and three different sizes of diameter, 35mm,
55mm,
75mm;
b) cylindrical / wedge-shaped electrode (optional)
c) adhesive pad with clamp connector (optional)
d) Kit TMA (optional)
- Capacitive electrodes:
circular electrodes are available with flat surface and three different sizes of
diameter, 35mm, 55mm, 75mm;
- Fixed Reference Electrodes:
a) rectangular top;
b) rectangular flexible top with rubber edge (optional);
c) cylindrical (optional).
- Mobile reference electrode:
It is available as an option a circular electrode with flat surface.
The three standard electrodes provided with all machines are shown in figures 3.2, 3.3,
3.4.The figure 3.5 show a couple of elbow adapters (optional) useful for permit a different
positioning of the electrode (cap and res).
Easytech s.r.l. – User Manual T CaRe Compact rev. D
T Care Compact
Pag. 16 di 36