easytech T CaRe Compact User Manual page 24

start touch
To restart with the same treatment it is possible to both the command (on
screen
) or the button on the knob can be used; the treatment restarts with the conditions
set, the power increases with a ramp up to the set value.
The operating parameters can also be changed during treatment (and the values on the
screen will be updated accordingly).
Figure 4-3 – Treatment in progress
If during a session the patient cannot tolerate the heat generated with the set power level
Pause
(eg for simple hypersensitivity) you can put the unit in (press in order to stop the
▌▌)
start
timer and change the setting. Reached the new value, press (►) and resumes
processing from where it was stopped.
When the treatment is active, a LED inside the handpiece lights up, at the resistive electrode
the led colour is red-orange, for capacitive one there is blue light.
When treatment is active, LED comes on the handpiece (only for Power and Physio
Aesthetic), to the resistive electrode and the electrode Face (only Physio Aesthetic) the LED
colour is orange-red, for those capacitive and Body (Physio Aesthetic) you have a blue light.
Easytech s.r.l. – User Manual T CaRe Compact rev. D Pag. 24 di 36