Moving The Inverter; Installing The Inverter - Goodwe SDT G2 Series User Manual

05 Installation
5.2 Inverter Installation

5.2.1 Moving the Inverter

1.
2.
3.

5.2.2 Installing the Inverter

•
•
when drilling holes.
• The anti-theft lock of appropriate size should be prepared by customers. Diameter of the
lock hole is 10mm.
• Make sure that all the DC input terminals are inside the PV box when installing the box.
Step 1 Put the mounting plate on the wall horizontally and mark positions for drilling holes.
Step 2 Drill holes to a depth of 80mm using the hammer drill. The diameter of the drill bit
should be 10mm.
Step 3 Secure the mounting plate using the expansion bolts.
Step 4
Step 5
Step 6 Install the anti-theft lock.
Step 7
Step 8
The diameter of the drill bit should be 8mm.
Step 9
User Manual V1.1-2022-08-15
CAUTION
NOTICE
18