Operating slider, 6 buttons
NOTE!
Ensure that the tail lifts working
area and periphery are clear.
Function, control unit
Slider out
Push button 4 (arrow left) at which the tail
lift slides out from transport position. Fold
out the platform
Tilt down
Push button (2) and button (3). Also here
gives the constant flow valve the same
speed independent of the load.
Lower
Push down button (2) and button (4). The
platform lowers with the same speed. The
constant flow valve gives the same speed
independent of the load.
Function, operation
1
SLIDER OUT
5
TILT
Automatic Tilt up from the ground
DOWN
Use buttons (1) and button (3). The
2+3
platform automatically tilts up to horizontal
level, then it turns into normal lift function .
If the load is to heavy or placed to far back
on the platform at tilt up, the overflow valve
opens.
LOWER
3
32
2
Automatic Tilt down to the ground
Use button (2) and button (4). When
reaching the ground the platform
automatically tilts down.
5
3
4
6
AUTO.
TILT
DOWN
2+4
AUTO.
TILT
UP
1+3