Operating Standard Lift, 3 Buttons + Turn Switch - Zepro ZHD 1500 User Manual

Operating standard lift, 3 buttons + turn switch

NOTE!
Ensure that the tail lifts working
area and periphery are clear.
FIXED CONTROL UNIT
3-button control unit + turn switch
3 button + turn switch is used to all
operating of the tail lift in order to avoid
crushing.
Function, fixed control unit
Open/tilt down
At opening from transport position: use turn
switch (4) tilt button (2) and down button (3)
in mentioned order. The constant flow valve
gives the same speed independent of the
load.
Function, operation
1
2
3
4
Lower
Activate the turn switch (4) and down
(3) button in mentioned order. The
constant flow valve gives the same speed
independent of the load.
Tilt down
Activate the turn switch (4) and push tilt (2)
and down button (3) in mentioned order.
The platform tilts down with the same
speed. Also here gives the constant flow
valve the same speed independent of the
load.
OPEN/
TILT DOWN
4+2+3
26
UP
TILT
DOWN
TURN SWITCH
LOWER
4+3
TILT DOWN
4+2+3