Hydraulic System Safety; User Safety - Zepro ZHD 1500 User Manual

Hydraulic system safety

The hydraulic system at Zepro tail lifts works under high pressure (up to 200 bar) and shall
be maintained continuously in order to function at a reliable and safe way.
All hydraulic units are equipped with an overflow valve as prevents that the tail lift can be
raised or tilted with an overload.
NOTE!
The operator isn't allowed to make any changes or adjustments of parts
belonging to the hydraulic system. If anything of the above has to be done,
this must be carried out by an authorized workshop.

User safety

The tail lift is equipped with a control unit.
The control units must be approved by Zepro and must be mounted at the same time as
the tail lift is mounted at the truck.
Control units can also be mounted at fixed brackets below the body.
Safety instructions
19