Operating Standard Lift, 4 Buttons - Zepro ZHD 1500 User Manual

Operating standard lift, 4 buttons

NOTE!
Ensure that the tail lifts working
area and periphery are clear.
4-button control unit
4 button control is used to all operating of
the tail lift in order to avoid crushing.
Function, control unit
Open/tilt down
At opening from transport position: use
button (2) and button (3).The constant flow
valve gives the same speed independent of
the load.
Function, operation
1
3
OPEN/
TILT DOWN
2+3
Lower
Use button (3) and button (4). The
constant flow valve gives the same speed
independent of the load.
Automatic Tilt down to the ground
Use button (3) and button (4). When
reaching the ground the platform
automatically tilts down. The constant flow
valve gives the same speed independent of
the load.
30
2
4
LOWER
3+4
AUTOMATIC
TILT DOWN
3+4