Zepro ZHD 1500 User Manual page 27

Operating standard lift, 3 buttons + turn switch
Tilt up
Activate the turn switch (4) tilt button (2)
and up button (1) in mentioned order. The
platform tilts up. If the load is to heavy or
placed to far back on the platform at tilt up,
the overflow valve opens.
Lift
Activate the turn switch (4) and push up
button (1). If the load is to heavy the over
flow valve opens.
Close
Activate the turn switch (4) and push tilt (2)
and up (1). The platform tilts up and close
against the body.
NOTE!
Always lift up the platform
against body floor before tilt
up/closing to transport position.
Function, operation
TILTING UP
4+2+1
LIFT
4+1
CLOSE
4+2+1
27
NOTE!
The platforms movement can
stop at anytime (if the push
buttons are released) and in
all positions because the push
buttons break the current to
respective function.
NOTE!
The hydraulic system is
protected against overload
at lift and tilt up of a built in
overflow valve. Notice that this
valve doesn't protect at resting
or lowering. This may under
no circumstances be used for
overloading at lowering.
OPERATING INSTRUCTION
The tail lift can only be used by authorized
personnel.
DO NOT OVERLOAD THE TAIL LIFT!
After operating the tail lift
Lock the platform, turn of the maneuver
current in the cabin. Then the tail lift is
locked for unauthorized people. If the
platforms lock handle (if available) goes
heavily, the reason can be hose break at
the lift or tilt system.
Note! Certain models of control units are
equipped with electric heating. The electric
heating is connected to the control current.
This will consume a little current from the
battery if the control current is switched on.