Working Area - Zepro ZHD 1500 User Manual

Working area

The control units are located in such a way, so they will give:
• A good oversee over the working area and the surroundings.
• A safe position in proportion to passing traffic.
NB!
Dangerzone: The area in which the platform is moving. This area may under no
circumstances set foot on when the tail lift is in use.
Working area: The area outside the platform where the operator may stand when the lift is
in use. If anyone else than the operator set foot on this area when the tail lift is in use must
all up or down movement cease immediately.
Area outside working area: The operator must be observant at the surroundings in order
to detect potential danger.
Danger zone
Working area
Safety instructions
16