Vestil FHSN Series Instruction Manual

Knockdown steel fixed height gantry cranes

Hide thumbs

page of 17

/ 17
Bookmarks

Quick Links

Download this manual

FHSN-Series Knockdown Steel Fixed Height Gantry Cranes

Receiving Instructions

After delivery, remove the packaging from the product. Inspect the product closely to determine

whether it sustained damage during transport. If damage is discovered, record a complete description of it on

the bill of lading. If the product is undamaged, discard the packaging.

NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance

comply with laws, regulations, codes, and mandatory standards applied where the product is used.

Technical Service & Replacement Parts

For answers to questions not addressed in these instructions and to order replacement parts, labels, and

accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also

be contacted online at http://www.vestilmfg.com/parts_info.htm.

Electronic Copies of Instruction Manuals

Additional copies of this instruction manual may be downloaded from

manuals.php.

Table of Contents

Specifications.....................................

Signal

Words..................................

Safety

Instructions...........................

National

Standards..........................

Assembling the

Crane....... 9, 10, 11,

Using the

Crane.............................

Loading the

Crane.........................

Record of Satisfactory

Condition.......

Inspections &

Maintenance..............

Labeling

Diagram..........................

Limited

Warranty...........................

rev. 7/9/2020

Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Web:

www.vestilmfg.com

Instruction Manual

Table of Figures

Fig. A: FHSN-2-10, FHSN-2-15, & FHSN-2-20 Exploded

Fig. B: FHSN-4-10, FHSN-4-15, & FHSN-4-20 Exploded

Fig. C: FHSN-6-10, FHSN-6-15, & FHSN-6-20 Exploded

Fig. D: FHSN-8-10, FHSN-8-15, & FHSN-8-20 Exploded View

Fig. E: FHSN-10-10 & FHSN-10-15 Exploded

Installing the Optional Festoon

FHSN, MANUAL.doc

Fax: (260) 665-1339

e-Mail:

https://www.vestil.com/page-

Kit............................................

info@vestil.com

View........

View.......

View......

......

View.....................

Page 1 of 17

Need help?

Do you have a question about the FHSN Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil FHSN Series

Page 1 Crane……. 9, 10, 11, Fig. E: FHSN-10-10 & FHSN-10-15 Exploded View………………… Using the Crane……..……………..…. Installing the Optional Festoon Kit…………………………….………. Loading the Crane……………………. Record of Satisfactory Condition……. Inspections & Maintenance………….. Labeling Diagram………….…………. Limited Warranty……………………… Copyright 2020 Vestil Manufacturing Co. Page 1 of 17...
Page 2 Rev. 7/9/2020 FHSN MANUAL SPECIFICATIONS Documents that provide specifications for FHSN series mobile cranes are available online to anyone who visits the Vestil website. Specifications include dimensions, net weight, and capacity information. Acquire the appropriate specifications document by opening this webpage: https://www.vestil.com/product.php?FID=520...
Page 3 LABELING DIAGRAM on p. 16. Contact Vestil for replacement labels. • DO NOT modify the crane in any way without the express approval of Vestil in writing. Unapproved modifications automatically void the LIMITED WARRANTY (P. 17) and might make the crane unsafe to use.
Page 4 Pin, adjustment/axel, pivot, roller 28-112-007 in. x 6” retaining pin 45282 #6 hitch pin clip 28-514-240 Weldment, 10ft. crane leg 11359 in. – 10 x 1 in. HHCS #2 zinc-plated bolt Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 4 of 17...
Page 5 Pin, adjustment/axel, pivot, roller 28-112-007 in. x 6” retaining pin 45282 #6 hitch pin clip 28-514-240 Weldment, 10ft. crane leg 11359 in. – 10 x 1 in. HHCS #2 zinc-plated bolt Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 5 of 17...
Page 6 28-516-053 WELDMENT, I-BEAM CLAMP Ø8" x 3" PHENOLIC 4 WAY SWIVEL 16-132-064 28-514-240 WELDMENT, LEG LOCK CASTER 33626 LOCK WASHER Z PLATED, Ø 1/2” 28-113-022 Shim, top plate clamp shim Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 6 of 17...
Page 7 – 10 x 1 in. HHCS #2 28-112-007 in. x 6” retaining pin 11359 zinc-plated bolt 45282 #6 hitch pin clip 28-113-022 Shim, top plate clamp shim Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 7 of 17...
Page 8 28-112-007 in. x 6” retaining pin 37030 45282 #6 hitch pin clip 16-132-305 Batwing caster position lock Weldment, cross brace bolt 28-514-240 Weldment, 10’ (H) crane leg 28-514-259 Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 8 of 17...
Page 9 • Read this instruction manual in its entirety before assembling the crane. • DO NOT modify the crane in any way without first receiving written approval from Vestil. • DO NOT use the crane if you notice damage to, or deformation of, the beam, uprights, or either of the leg assemblies.
Page 10 FIG. 3Bii: Exploded view of beam FIG. 3Bi: Exploded view of beam connection (FHSN-6-20 & FHSN-8-20) connection Beam flange Beam flange Fig. 3A: I-beam Connection to Beam Bracket of Upright Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 10 of 17...
Page 11 DO NOT raise the beam unless all other persons have moved to a location away from and behind the fork truck. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 11 of 17...
Page 12 ½ in. – 13 x 2in. HHCS #5 in. – 18 x ¾ in. HHCS #2 in. – 18 x in. HHCS #2 zinc-plated bolt zinc-plated bolt zinc-plated bolt Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 12 of 17...
Page 13 However, touchup paint should be applied as soon as damage occurs. If your crane is not painted or powdercoated, touchup paint is not required. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 13 of 17...
Page 14 NOTE: Inspection procedures are included in the most current revision of ASME B30.17. As stated in the NATIONAL STANDARDS section on p. 3, Vestil recommends that you acquire a copy of the most recent revision of this standard. Apply all use and maintenance/care instructions in the standard. Vestil also recommends that you contact your local occupational health and safety authority to determine if any authorities (laws, regulations, codes, ordinances, etc.) apply inspection requirements where the crane is used.
Page 15 USS flat washer 45503 in. wire rope (1 in. longer than 1-beam) 34785T4 Quick-grip wire rope clamp CV200 Plastic cable tie O-RING15 Metal ring FCOIL 143-001 Coiled power cord Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 15 of 17...
Page 16 (260) 665-7586 and asking for PARTS DEPARTMENT. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 16 of 17...
Page 17 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.

This manual is also suitable for:

Fhsn-2-10 Fhsn-2-15 Fhsn-2-20 Fhsn-4-10 Fhsn-4-15 Fhsn-4-20 ... Show all