Download Print this page
Vestil AHA Series Instruction Manual

Vestil AHA Series Instruction Manual

Aluminum adjustable-height gantry crane
Hide thumbs Also See for AHA Series:

Advertisement

Quick Links

Table of Contents
AHA-
SERIES
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If
the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply with laws,
regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-manuals.php.
Table of Contents
Specifications............................ 2, 3,
Signal
Words.............................
Safety Instructions....................... 4
Assembling the
Crane.................. 17, 18, 19,
Using the
Crane..............................
Record of Satisfactory
Condition..... 21,
National
Standards.....................
Inspections & Maintenance
Labeling
Diagram........................
Limited
Warranty........................
Table of Contents
A
A
LUMINUM
DJUSTABLE
I
NSTRUCTION
4
FIG. 1
4
FIG. 2
FIG. 3
20 FIG. 4
21
FIG. 5
22
FIG. 6
22
FIG. 7
...........
22
FIG. 8
23
FIG. 9
24
FIG. 10
FIG. 11
FIG. 12
Copyright 2020 Vestil Manufacturing Corp.
Rev. 2/4/2021
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestil.com
Website:
-H
EIGHT
M
ANUAL
Table of Figures
Exploded view: AHA-2-8-8, 2-8-10, & 2-8-12 ................................
Exploded View AHA-2-10-8, 2-10-10, & 2-10-12............................
Exploded View AHA-2-12-8, 2-12-10, & 2-12-12...........................
Exploded View AHA-2-15-8, 2-15-10, & 2-15-12............................
Exploded View AHA-4-8-8, AHA-4-8-10, & AHA-4-8-12...................
Exploded View AHA-4-10-8, AHA-4-10-10, & AHA-4-10-12 .............
Exploded View AHA-4-12-8, AHA-4-12-10, & AHA-4-12-12 .............
Exploded View AHA-4-15-8, AHA-4-15-10, & AHA-4-15-12 .............
Exploded View AHA-6-8-8, AHA-6-8-10, & AHA-6-8-12 ..................
Exploded View AHA-6-10-8, AHA-6-10-10, & AHA-6-10-12............
Exploded View AHA-6-12-8, AHA-6-12-10, & AHA-6-12-12 ...........
Exploded View AHA-6-15-8, AHA-6-15-10, & AHA-6-15-12 ...........
AHA MANUAL
e-Mail:
i nfo@vestil.com
U
H
G
C
ANTRY
RANE
Page 1 of 24
U
5
6
7
8
9
10
11
12
13
14
15
16

Advertisement

loading
Need help?

Need help?

Do you have a question about the AHA Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil AHA Series

  • Page 1 Technical Service and Parts Department at (260) 665-7586. The department can also be contacted online at http://www.vestilmfg.com/parts_info.htm. Electronic copies of Instruction Manuals Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-manuals.php. Table of Contents Table of Figures Specifications………...…………….
  • Page 2 3, and 4. However, minor changes in product design might alter specifications, particularly dimensions and net weight. To provide instant access to up-to-date information, documents that provide specifications for AHA series cranes are available online to anyone who visits the Vestil website. Acquire the appropriate specifications document by opening this webpage: https://www.vestil.com/product.php?FID=522...
  • Page 3 - 150 ) in. 1,500 lb. 368 lb. AHA-15-15-12-PNU 136.5 cm 457.2 cm 396.9 kg 20.3 cm (325.8 – 402.0) cm (305.4 – 381.6) cm 681.8 kg 167.3 kg Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 3 of 24...
  • Page 4 See LABELING DIAGRAM on p. 23. Contact Vestil for replacement labels. • DO NOT modify the crane in any way without the express approval of Vestil in writing. Unapproved modifications automatically void the LIMITED WARRANTY and might make the crane unsafe to use.
  • Page 5 ½ in. – 13 A325 galvanized 28-514-220 2k leg tube weldment Adjustable upright weldment: (when ordering replacements, only sold as a pair) 28-514-227 AHA-2-8-8 28-514-228 AHA-2-8-10 28-514-229 AHA-2-8-12 Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 5 of 24...
  • Page 6 ½ in. – 13 A325 galvanized structural nut & bolt combo 28-514-220 2k leg tube weldment Adjustable upright weldment: (when ordering replacements, only sold as a pair) 28-514-227 AHA-2-10-8 28-514-228 AHA-2-10-10 28-514-229 AHA-2-10-12 Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 6 of 24...
  • Page 7 ½ in. – 13 x 2½ in.A325 galvanized structural nut & bolt combo 16 & 17 11134585 ½ in. – 13 A325 galvanized structural nut & bolt combo Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 7 of 24...
  • Page 8 ½ in. – 13 x 2½ in.A325 galvanized structural nut & bolt combo 16 & 17 11134585 ½ in. – 13 A325 galvanized structural nut & bolt combo Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 8 of 24...
  • Page 9 – 16 zinc plated hex nut 28-516-054 I-beam clamp weldment 08-025-007 in. – 16 UNC threaded knob, TT-18-PED 28-514-221 4k leg tube weldment GFN-8/2-S-4PSL Glass filled nylon 4-position swivel locking caster (16-132-249) Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 9 of 24...
  • Page 10 – 16 zinc plated hex nut 28-516-054 I-beam clamp weldment 08-025-007 in. – 16 UNC threaded knob, TT-18-PED 28-514-221 4k leg tube weldment GFN-8/2-S-4PSL Glass filled nylon 4-position swivel locking caster (16-132-249) Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 10 of 24...
  • Page 11 ½ in. – 13 A325 galvanized structural nut & bolt combo 28-516-054 I-beam clamp weldment 08-025-007 in. – 16 UNC threaded knob, TT-18-PED 28-514-221 4k leg tube weldment GFN-8/2-S-4PSL Glass filled nylon 4-position swivel locking caster (16-132-249) Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 11 of 24...
  • Page 12 10 in. (H) x 4.66 in. (W) x 180 in. (L) aluminum I-beam 28-516-054 I-beam clamp weldment 08-025-007 in. – 16 UNC threaded knob, TT-18-PED 28-514-221 4k leg tube weldment GFN-8/2-S-4PSL Glass filled nylon 4-position swivel locking caster (16-132-249) Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 12 of 24...
  • Page 13 – 16 x 1 in. HHCS #2 zinc-plated bolt 33008 in. USS zinc-plated flat washer 36106 in. - 16 hex nut, zinc plated 33622 in. lock washer, zinc plated Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 13 of 24...
  • Page 14 – 16 x 1 in. HHCS #2 zinc-plated bolt 33008 in. USS zinc-plated flat washer 36106 in. - 16 hex nut, zinc plated 33622 in. lock washer, zinc plated Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 14 of 24...
  • Page 15 – 16 x 1 in. HHCS #2 zinc-plated bolt 33008 in. USS zinc-plated flat washer 36106 – 16 in. hex nut 33622 in. lock washer, zinc plated Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 15 of 24...
  • Page 16 ½ in. – 13 x 2½ in. A325 galvanized structural nut & bolt 1134585 ½ in. -13 A325 galvanized structural nut & bolt 28-025-003 Strap 33626 in. lock washer, zinc plated Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 16 of 24...
  • Page 17 Adjustment Kit Instruction Manual available online at www.vestil.com/page- manuals.php Upright Slide doubled cable loop onto receiver of yoke. Cable must wrap around yoke below both the adjustment pin and threaded knob. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 17 of 24...
  • Page 18 (See Diagram 4B). second bolt hole (see arrows). 4. Identify the 4 bolt holes that lie just outside the width of the parallel lines. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 18 of 24...
  • Page 19 Slowly raise the beam while slowly driving forward until the crane stands on its feet. DO NOT raise the beam unless all other persons have moved to a location away from and behind the fork truck. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 19 of 24...
  • Page 20 2) Turn the caster. 3) Release the pin. 4) Turn the caster until the pin seats into the closest notch. Your Vestil AHA-series crane is now ready to use. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 20 of 24...
  • Page 21 Record to determine whether the crane is in satisfactory condition. Do not use the crane unless it is in satisfactory condition. Purely cosmetic changes, like damaged paint or Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 21 of 24...
  • Page 22 Vestil recommends that you acquire a copy of the most recent revision of this standard. Apply all use and maintenance/care instructions in the standard. Vestil also recommends that you contact your local occupational health and safety authority to determine if any laws, regulations, codes, ordinances, etc. apply inspection requirements where the crane is used.
  • Page 23 Label 599: Label 397: Label 398: Label 256: Label 400: (Both Sides of I-Beam) Label 391 Label 649: Label 532: Label 420: Label 601: Label 395: Label 392: Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 23 of 24...
  • Page 24 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.