Supermicro X11DPT-BR User Manual page 40

Super X11DPT-BR User's Manual
DIMM Installation
1. Please follow the instructions given in the
previous section to install the DIMM modules
on the motherboard. For the system to work
properly, please use memory modules of the
same type and speed on the motherboard.
2. Push the release tabs outwards on both ends of the
DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive
point on the memory slot.
4. Align the notches on both ends of the module against
the receptive points on the ends of the slot.
5. Use two thumbs together to press the notches on both
ends of the module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions to secure
the DIMM module into the slot.
DIMM Module Removal
Press the release tabs on both ends of the DIMM socket to release the DIMM module from
the socket as shown in the drawing on the right.
Warnings!
1. Please do not use excessive force when pressing the release tabs on the ends of the DIMM
socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page 1
of this chapter to avoid ESD-related damages done to your memory modules or components.
40
UID_LED1
CEC_HB LED
VGA
BMC_ERR LED
PCH_ERR LED
JUSB1
COM1
USB 0/1 (3.0)
IPMI_LAN
BMC
BMC_HB_LED1
Flash Flash
JSIOM1
BIOS CPU1 Slot PCI-E 3.0x16
LED6
CPLD_HB LED
JWD1
PCH
NVME1
X11DPT-BR
JBT1
Rev. 1.01
Battery
CMOS
Clear
BIOS
SXB4
LICENSE
BAR CODE
JSD1
SXB1
CPU1
SXB2
CPU2
Notches
Release Tabs
Press both notches
straight down into
the memory slot.