Table of Contents
Advertisement
Chapter 4: UEFI BIOS
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes upon next system boot.
The options are No and Yes.
**Configure IPv4 Support**
IPMI LAN Selection
This feature allows the user to select the type of the IPMI LAN. The default setting is Failover.
IPMI Network Link Status
This feature displays the status of the IPMI network link for this system. The default setting
is Dedicated LAN.
Configuration Address Source
This feature allows the user to select the IP address source for this computer. If Static is
selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server attached to the network and request the next available IP
address for this computer. The options are DHCP and Static.
Station IP Address: TThis feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 172.29.197.196).
Subnet Mask: This feature displays the sub-network that this computer belongs to. The value
of each three-digit number separated by dots should not exceed 255.
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 172.29.0.1).
VLAN: This feature displays the status of VLAN support. The default setting is Disabled.
**Configure IPv6 Support**
IPv6 Address Status: This feature displays the status of IPv6 addresses.
IPv6 Support: Select Enabled for IPv6 support. The options are Enabled and Disabled.
121
Advertisement
Table of Contents
