Table of Contents
Advertisement
Onboard LAN1 Option ROM (available when NIC(s) is(are) detected by the system)
Use the arrow keys to select Onboard LAN1 Option ROM and press <Enter>. The options
are Disabled, Legacy, and EFI. Set this feature to EFI.
Note : If Onboard LAN1 Option ROM is set to EFI, all features for onboard LAN op-
tion ROM will be set to EFI by the EFI driver. Additionally, these features will become
unavailable except Onboard LAN1 Option ROM.
For the changes to take effect, press <F4> to save the settings and exit the BIOS Setup utility.
Press <Del> during system boot to enter the BIOS Setup utility. Navigate to the Advanced
tab. The feature(s) for onboard Intel® LAN device(s) will become available for configuration
as shown below.
Appendix H: Configuring Network Interface Card (NIC) Settings
215
Advertisement
Table of Contents
