Supermicro X11DPT-BR User Manual page 144

Super X11DPT-BR User Manual
5. After the BIOS recovery process is complete, press any key to reboot the system.
Note: Before rebooting the system, be sure to remove the USB device that contains
the SUPER.ROM file and insert the USB device that contains the BIOS package you
extracted earlier from Step 1.
6. Press <Del> during system boot to enter the BIOS Setup utility. From the top of the tool
bar, select Boot to enter the submenu. From the submenu list, select Boot Option #1
as shown below. Then, set Boot Option #1 to [UEFI AP:UEFI: Built-in EFI Shell]. Press
<F4> to save the settings and exit the BIOS Setup utility.
144