Transporting And Storing The Printer - Epson ET-4810 Series User Manual

In These Situations
4. Select Basic.
5. Select Manual for Obtain IP Address.
6. Enter the IP Address you are setting up in IP Address.
Set the subnet mask, default gateway, DNS server, and so on. according to your network environment.
7. Click Next.
8. Click OK.
The settings are applied.
To access Web Config again, specify the IP address you set.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 210
&

Transporting and Storing the Printer

When you need to store the printer or transport it when moving or for repairs, follow the steps below to pack the
printer.
1. Turn off the printer by pressing the
2. Make sure the power light turns off, and then unplug the power cord.
Important:
c
Unplug the power cord when the power light is off. Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. Remove all of the paper from the printer.
>

Transporting and Storing the Printer

P
button.
136