When Replacing A Computer; Saving Power; Checking The Total Number Of Pages Fed Through The Printer - Epson ET-4810 Series User Manual

In These Situations

When Replacing a Computer

You need to install the printer driver and other software on the new computer.
Access the following website, and then enter the product name. Go to Setup, and then start setting up. Follow the
on-screen instructions.
https://epson.sn

Saving Power

The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.
1. Select Settings on the home screen.
To select an item, use the
2. Select Printer Setup.
3. Do one of the following.
❏ Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected.
❏ Select Sleep Timer or Power Off Timer.
Note:
Your product may have the Power Off Settings or Power Off Timer feature depending on the location of purchase.
4. Select the setting.
Checking the Total Number of Pages Fed Through the
Printer
You can check the total number of pages fed through the printer. The information is printed together with the
nozzle check pattern.
1. Select Maintenance on the printer's control panel.
To select an item, use the
2. Select Nozzle Check.
3. Follow the on-screen instructions to load paper and print the nozzle check pattern.
>

Checking the Total Number of Pages Fed Through the Printer

u d l r
buttons, and then press the OK button.
u d l r
buttons, and then press the OK button.
114