Epson ET-4810 Series User Manual page 32

Loading Paper
>
Loading Papers
2. Slide the edge guides.
3. Load paper at the center of the paper support with the printable side facing up.
Important:
c
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line just under the
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
4. Slide the edge guides to the edges of the paper.
ET-2840 Series/L3560 Series: Close the feeder guard after sliding the edge guides.
Important:
c
ET-2840 Series/L3560 Series: Do not place objects on the feeder guard. Doing so may prevent paper from
feeding.
5. Select the paper size and paper type.
>
Loading Paper in the Rear Paper Feeder
d
symbol inside the edge guide.
32