Epson ET-4810 Series User Manual page 161

Solving Problems
"Running Power Cleaning" on page 106
&
The print settings and the paper size loaded in the printer are different.
Solutions
Change the print settings according to the paper size loaded in the printer. Load paper in the printer that
matches the print settings.
Multiple sheets of paper are fed into the printer at the same time.
Solutions
See the following to prevent multiple sheets of paper being fed into the printer at the same time.
"Several Sheets of Paper are Fed at a Time" on page 156
&
Paper Is Smeared or Scuffed
The following causes can be considered.
Paper is loaded incorrectly.
Solutions
When horizontal banding (perpendicular to the printing direction) appears, or the top or bottom of the
paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper.
"Loading Paper in the Rear Paper Feeder" on page 31
&
The paper path is smeared.
Solutions
When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the
paper path.
"Cleaning the Paper Path for Ink Smears" on page 108
&
The paper is curled.
Solutions
Place the paper on a flat surface to check if it is curled. If it is, flatten it.
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
161
Print Quality is Poor