Advertisement
PRODUCT NAME: Tumlin Revolving Bar Cabinet
ITEM NUMBER: SR075
ASSEMBLED DIMENSIONS : 38"H x 37.5"W x 17"D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6-14-2022
Serious or fatal crushing injuries can occur from a furniture tip-over
Prevent tipping accidents. Anchor your furniture.
REQUIRED TOOLS:
Phillips Screwdriver, Allen Wrench (included)
-Two person assembly suggested.
Ltr.
Qty.
A
1
B
2
DOOR ADJUSTMENT:
To adjust door swing resistance (+/-)
place Cabinet backside down and
turn adjustment screw clock-
(A)
wise/counterclockwise using Allen
Wrench (A).
LEVELERS: Cabinet is equipped with Rotary
Levelers installed under each Leg. If neces-
sary, adjustments may be made by carefully
lifting applicable corner and turning Levelers
clockwise/counterclockwise.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Tip-Over Hazard
ANCHORING HARDWARE INCLUDED
Hardware Included
Allen Wrench
(Retain for Door Adjustments)
Wall Anchoring
(Anti-tip) Kits
See page 2
Cleaning and Care
Periodically dust with a soft, dry cloth.
MADE IN INDIA
Page 1 of 2
Advertisement
Table of Contents
Related Manuals for Ballard Designs Tumlin SR075
Summary of Contents for Ballard Designs Tumlin SR075
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Tumlin Revolving Bar Cabinet ITEM NUMBER: SR075 ASSEMBLED DIMENSIONS : 38”H x 37.5”W x 17”D WARNING Tip-Over Hazard ANCHORING HARDWARE INCLUDED Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. REQUIRED TOOLS: Phillips Screwdriver, Allen Wrench (included) -Two person assembly suggested.
- Page 2 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Small Screw WARNING Large Screw Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.
Need help?
Do you have a question about the Tumlin SR075 and is the answer not in the manual?
Questions and answers