Related Manuals for Ballard Designs Pomona SF070
Summary of Contents for Ballard Designs Pomona SF070
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Pomona Sideboard and Hutch ITEM NUMBER: SF070 ASSEMBLED DIMENSIONS : 73”H x 48”W x 19.5”D PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE. UPDATED: 5-20-2020 Page 1 of 6...
-
Page 2: Required Tools
Assemble in location for intended use. WARNING Tip-Over Hazard REQUIRED TOOLS: ANCHORING HARDWARE INCLUDED Phillips Screwdriver Serious or fatal crushing injuries can occur from a furniture tip-over -Two person assembly suggested. Prevent tipping accidents. Anchor your furniture. Remove all parts, hardware and Ltr. - Page 3 Assemble in location for intended use. STEP 1: Carefully lift and place Hutch (E) onto Sideboard (F). Center and align back edge. WARNING: To prevent a dangerous tip-over accident, Sideboard and Hutch must be connected and securely bracketed as outlined in Step 2. STEP 2: Connecting Brackets (B) are pre-attached to back of Hutch (E).
- Page 4 Assemble in location for intended use. STEP 3: Insert each Shelf Supports (A) into pre-drilled holes located inside Sideboard (F). Tilt and insert Shelf (D) into Sideboard and set level upon Supports. STEP 4: Sideboard is equipped with Rotary Levelers located under each corner. If necessary, Sideboard may be adjusted by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
- Page 5 WARNING: To prevent a dangerous tip-over accident, connected Sideboard and Hutch must be bracketed and securely anchored to a WALL STUD as outlined in Steps 5 through 8. STEP 5: Locate and mark two WALL STUDS in wall behind installation location for Hutch and Sideboard. Push unit against wall in front of marked studs.
- Page 6 STEP 7: Pull unit away from wall and anchor L-Brackets into studs using three screws. Firmly drive screws directly into stud until completely tightened and Bracket is secured. Wall Stud STEP 8: Push unit back into place and slide underneath installed L-Brackets. Use two or more screws to attach L-Bracket to top of Hutch.
Need help?
Do you have a question about the Pomona SF070 and is the answer not in the manual?
Questions and answers