Advertisement
Quick Links
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
PRODUCT NAME: Daphne Sideboard and Hutch
ITEM NUMBER: SF067
ASSEMBLED DIMENSIONS : 79""H x 60"W x 17 3/4"D
PRODUCTS ARE NOT INTENDED
MADE IN CHINA
FOR COMMERCIAL USE.
UPDATED: 12-19-2019
Page 1 of 6
Advertisement
Related Manuals for Ballard Designs Daphne SF067
Summary of Contents for Ballard Designs Daphne SF067
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Daphne Sideboard and Hutch ITEM NUMBER: SF067 ASSEMBLED DIMENSIONS : 79””H x 60”W x 17 3/4”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 12-19-2019 Page 1 of 6...
-
Page 2: Required Tools
NOTE: Assemble in location for intended use. (Sold Separately) REQUIRED TOOLS: WARNING Phillips Screwdriver Tip-Over Hazard -Two person assembly suggested. Remove all parts, hardware and Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. protective packaging from carton Wall Anchoring Hardware Included and carefully arrange on a clean,... - Page 3 Wall Anchoring/Anti-Tip L-Bracket BRACKET MUST BE ATTACHED TO WALL STUD Short Shelf (L) Hutch (K) Long Shelf (M) STEP 1: Prepare Sideboard (SF055 Sold Separately) by positioning in area for use then determining location for Shelves (C,D). Insert Shelf Supports (A) into corresponding pre-drilled holes then gently place shelf level upon padded surface.
- Page 4 STEP 2: Carefully lift and place Hutch (K) on top of Sideboard (B) and align back as shown. Attach metal Brackets (I) as illustrated, being certain that Screws (H) are driven into solid wood. Firmly tighten using a Phillips Screwdriver. STEP 3: Determine location for each Shelf (L,M) then insert Shelf Supports (E) into corresponding pre-drilled holes then gently place Shelf upon padded surface.
- Page 5 STEP 4: To prevent an accidental tip-over, it is important to postion Hutch/Sideboard in front of TWO WALL STUDS for attachment of Anchoring Hardware. Push unit against wall and mark location of both wall studs. WALL STUD WARNING Tip-Over Hazard WALL BRACKET MUST BE ATTACHED TO WALL STUD Prevent tipping accidents.
-
Page 6: Cleaning And Care
STEP 6: Pull Hutch (K) away from wall and attach an L-Bracket (J) to each marked location using Long Screws (F). Use a Phillips Screwdriver to firmly and securely drive each Screw directly into WALL STUD. STEP 7: Carefully slide Hutch (K) under attached L-Brackets (J) and use two or more Short Screws (G) to attach L-Bracket to top of Hutch.
Need help?
Do you have a question about the Daphne SF067 and is the answer not in the manual?
Questions and answers