Summary of Contents for Ballard Designs CASA Florentina
Page 1
Customer Service : 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Medici Secretary Desk with Hutch ITEM NUMBER: MO323 ASSEMBLED DIMENSIONS: 72 1/4”H x 25”W x 14 1/2”D PRODUCT NOT INTENDED MADE IN ITALY FOR COMMERCIAL USE. Page 1 of 4 UPDATED: 3-16-2020...
Page 2
Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included Phillips Screwdriver -Two person assembly suggested. Screws Remove all parts, hardware and protective packaging from carton Connector Plates and carefully arrange on a clean, level, padded surface. Shelf Supports NOTE: To avoid accidentally discarding small parts or hardware,...
Page 3
STEP 1: Carefully lift Hutch (F) and place on top of Desk (G). Center and align then join both together by placing Connector Brackets (B) as illustrated below and securing with Screws (A). WARNING: To prevent tip-over, Connector Brackets (B) must be used to join units. NOTE: Attach the Brackets near the edges for the best support.
Page 4
WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.
Need help?
Do you have a question about the CASA Florentina and is the answer not in the manual?
Questions and answers