Summary of Contents for Ballard Designs Casa Florentina SF017
Page 1
Customer Service : 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Extended Antoinette Sideboard ITEM NUMBER: SF017 ASSEMBLED DIMENSIONS: 36 1/2”H x 73 3/4”W x 17 1/4”D PRODUCT NOT INTENDED MADE IN ITALY FOR COMMERCIAL USE. Page 1 of 4 UPDATED: 3-10-2020...
Page 2
Assemble in location for intended use. TOOLS NEEDED: Ltr. Qty. Hardware Included Phillips Screwdriver -Two person assembly suggested. Keys Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, Wall Anchoring level, padded surface. (Anti-tip) Kits NOTE: To avoid accidentally See page 4...
Page 3
STEP 1: Carefully place Console (C) back down onto a clean, padded, level surface then insert and tighten Feet (D) into T-nuts embedded on underside. NOTE: To prevent damage, do not place uneven pressure on Feet as Console is turned upright. STEP 2: Place Shelves (E) onto fixed supports inside Console (C).
Page 4
WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.