Advertisement
Model:
General (GW Models)
Conditions for use:
For the Series Print mode to become effective, jobs must be sent from the same PC, using
the same PDL and interface (Ethernet, IEEE1284, IEEE1394).
Limitations:
Series Print mode cannot be used when:
- The above conditions are not met
- Stapling or punching is used
- A user code is used
- Color and black-and-white jobs are mixed (only for color machines)
Remarks:
When enabled, the machine handles the jobs waiting to be printed as a single job.
When the Job Reset key on the operation panel is pressed, all jobs combined by this
feature are cancelled.
Applied from the following software versions:
K-P1:
Controller Ver. 1.11
J-P1:
1st mass production of P1b
A-P3:
1st mass production
U-P1:
1st mass production
R-C2:
1st mass production
T
B
echnical
ulletin
Date:
20-Dec-01
PAGE: 2/2
No.:
RGene010
Advertisement
