Advertisement
T
B
echnical
ulletin
PAGE: 5/8
Reissued: 11-Jan-05
Model:
Date:
No.:
Model U-P1
3-Feb-03
RG071004f
Symptom Corrected
Version
V1.47A
2. Existing SP mode subdivided:
SP3-920 has been subdivided as follows to enable separate lubrication
time control for 1C vs. 2C/3C/4C.
SP3-920-001 (Lubrication Cleaning Time: - 1C)
[0 ~ 100 / 50 / 1% /step]
SP3-920-002 (Lubrication Cleaning Time: - 2C/3C/4C)
[0 ~ 100 / 100/ 1% /step]
3. Carryover SP modes from Copier firmware – Currently UNUSABLE
The following are the SP modes carried over from the Copier firmware
which will therefore appear on the display, as the printer firmware is
created using the Copier firmware base. Please note that currently
these SP modes should not be used on the printer, therefore please
DO NOT CHANGE their values.
SP2-951-001 (Image Position Adjustment): DFU
0: New PCU: ITB cleaning blade:
1: Old PCU: No ITB cleaning blade (Default):
SP2-950 (Start Registration Adjustment):
SP2-921-001 (ITB Cleaning Clutch OFF Mode): DFU
0: New PCU: ITB cleaning blade
1: Old PCU: No ITB cleaning blade (Default)
SP2-920-001 (ITB Cleaning Clutch OFF Time)
[-500 ~ 500 / 0 / 10 /step]
SP2-924-001 (ITB Cleaning Clutch Off/On – Time)
[100 ~ 500/ 300 / 10ms /step]
SP2-924-002 (ITB Cleaning Clutch Off/On – Number)
[0 ~ 5/ 0 / 1 /step]
NOTE: Along with this BICU version, be sure to update the main unit
controller firmware to v2.29 or later.
Advertisement
