Advertisement
Model:
Model U-P1
Subject:
Charge Corona Harness
From:
1st Tech. Support Sec. Service Support Dept.
Classification:
Important Notes for When Replacing the Charge Corona Unit and PCU
l When you Replace the Charge Corona Unit:
1. Do not straighten the cleaner motor harness if this harness is white.
l From May 2006 production, the material of the harness was changed to a more
environmentally-friendly type. The new harness is white and the material is
harder than the black harness.
l The new harness is bent at the factory. This is to make sure that harness does
not push the quenching lamp (QL).
l If you straighten the white harness, an error will be displayed ("Reset Charger
Correctly").
Black harness
2. If this occurs when you install the charge corona unit:
This means the white harness is straight, and is pushing on the QL/holder connection
(see the photos on the next page).
Action: Correct the QL position and bend the white harness so that it does not push
the QL.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
22-Nov-06
Prepared by:
Part information
Electrical
Transmit/receive
Other (
)
White harness
PAGE: 1/3
No.:
RG071015
H.K.
Action required
Service manual revision
Retrofit information
Advertisement
