Reattaching The Antenna End Cap - Cisco 3200 Series Hardware Upgrade Manual

Card Replacement Process

Reattaching the Antenna End Cap

Step 1
Step 2
Step 3
Step 4
Cisco 3200 Series Router Hardware Upgrade Guide
3-16
Get user manuals: See SafeManuals.com
To reattach the antenna end cap, follow these steps:
If you have added new WMICs, remove the corresponding antenna end cap plugs from the antenna end
cap and replace them with RP-TNC connectors.
Attach the antenna cables to the antenna end cap, as shown in
Attach the antenna identification labels for the new WMICs on the antenna end cap's exterior, as shown
in Figure 3-16. (Figure 3-16
Figure 3-16 Attaching Antenna Labels
1
1 Label
Use a 3/8-inch socket to secure the antenna end cap with four 1/4-20 x 1 1/4-inch-long bolts. The torque
range for the antenna end cap bolts is 58 to 68 in-lb.
Chapter 3
shows one new label being applied over an old label.)
Replacing Cards in the Cisco ISR 3270 Rugged Enclosure
Figure 2-2.
OL-15983-01