Cisco 3200 Series Hardware Upgrade Manual page 34

Card Replacement Process
Cisco 3200 Series Router Hardware Upgrade Guide
2-18
Get user manuals: See SafeManuals.com
If a protective end cap cover is used to provide weatherproof protection for the ports on the I/O
Note
end cap, align the holes of the hinge brackets of the protective end cap to the I/O end cap with
the holes of the mounting bolts on the I/O end cap. Then, insert the (4) mounting bolts through
the hinge bracket and I/O end cap holes to attach the I/O end cap and its protective cover to the
extrusion. Figure 2-16
Figure 2-16 Cisco 3200 Rugged Enclosure Protective End Cap Cover
1
2
1 Hinge point
3
Holes for 8/32-inch-long protective end
cap cover screws
5 Mounting bolt
Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
shows the parts of a protective end cap cover.
3
2 NEC cable pass-through
4
Hinge/mounting bracket
5
4
OL-15983-01