C H A P T E R 2 Replacing Cards In The Cisco 3230 Isr Rugged Enclosure; Disconnecting All Cables From The Enclosure; Removing The Antenna End Cap - Cisco 3200 Series Upgrade Manual

Card Replacement Process

Disconnecting All Cables from the Enclosure

Before you start working on rugged enclosures, disconnect all cables, including power, to avoid
Warning
damage to the unit.

Removing the Antenna End Cap

Class 1 laser product. Statement 1008
Warning
To remove the antenna end cap of a Cisco 3230 Rugged Enclosure, follow these steps:
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.
Caution
Using a 3/8-inch socket wrench to loosen the four 1/4-20 bolts on the end cap.
Step 1
bolts.
Figure 2-1
Cisco 3200 Series Router Hardware Upgrade Guide
2-2
Antenna End Cap Bolts
Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
Figure 2-1 shows these
OL-15983-01