Table of Contents
Advertisement
HUAWEI X6800 Server
Technical White Paper
Figure 5-4 Cabling from the HMM (converged management)
l The active/standby switchover feature of the X6800 HMMs is not available at present.
l The converged management network port on the HMM provides an external interface for
l Enhancement has been made on the management network ports on the mounting ear and
Issue 02 (2019-03-13)
Therefore, the X6800 comes with only one HMM.
the LSW. The HMM is different from the management module (MM) of blade servers.
The MM integrates a management plane switching chip, while the HMM only provides an
external port for the management plane switch.
on the HMM to prevent self-loop between the LSW and management switches in the
equipment room. If both of the ports are connected to the management network, the port
on the mounting ear has higher priority and the port on the HMM will be disabled by
software.
Copyright © Huawei Technologies Co., Ltd.
5 Management
30
Advertisement
Table of Contents
