HUAWEI X6800 Server
Technical White Paper
Figure 5-2 Point-to-point networking
l
The X6800 is connected to the switch outside the X6800 chassis through a cable led out from
the front mounting ear on the X6800 chassis. The out-of-band management network
communicates with the X6800 server nodes through the LAN switch (LSW) chip in the
X6800 chassis. You need to change LAN Port Configuration (Dedicated by default) to
Shared on the BIOS.
Figure 5-3 Cabling from the mounting ear (converged management)
l
The X6800 is connected to the switch outside the X6800 chassis through a cable led out from
the converged management port on the HMM in the X6800 chassis. The out-of-band
management network communicates with the X6800 server nodes through the LSW chip in
the X6800 chassis. You need to change LAN Port Configuration (Dedicated by default) to
Shared on the BIOS.
Issue 02 (2019-03-13)
Cabling from the mounting ear for converged management
Figure 5-3
Cabling from the HMM for converged management
Figure 5-4
Copyright © Huawei Technologies Co., Ltd.
shows the cable connections.
shows the cable connections.
5 Management
29