Advertisement
Quick Links
Break Away Fitting for Submersible Pumps
IMPORTANT!
Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notifi cation.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
Manual Index
BARNES
BARNES
INSTALLATION MANUAL
Models: BAF-6 (Standard)
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
®
P/N: 091550
BAF-E6 (Non-Sparking)
P/N: 091551
Form No. 090105-Rev. E
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Crane Barnes BAF-6
Summary of Contents for Crane Barnes BAF-6
- Page 1 Read all instructions in this manual before operating pump. As a result of Crane Pumps & Systems, Inc., constant product improvement program, product changes may occur. As such Crane Pumps & Systems reserves the right to change product without prior written notifi cation.
-
Page 2: Safety First
Other brand and product names are trademarks or registered trademarks of their respective holders. ® Barnes is a registered trademark of Crane Pumps & Systems, Inc. 1994, 1997, 1998, 2002, 3/06, 9/06 Alteration Rights Reserved... -
Page 3: Specifications
SPECIFICATIONS: MODEL: BAF-6 (091550) LOCATION: This BAF-6 is designed for wet wells, tanks, or lift stations where it is necessary to remove a pump from service and reinstall the pump without maintenance personnel entering the pit to unbolt the pump fl anges. STATIONARY ELBOW: Cast iron, ASTM A48, Class 30. - Page 4 inches (mm) Figure 2 Figure 1...
- Page 5 For the location of the nearest Barnes Service Center, check pipe. your Barnes representative or Crane Pumps & Systems, Inc., Service Department in Piqua, Ohio, telephone (937) 778-8947 C-4) Installing Pump Body To Break Away Fitting: or Crane Pumps &...
- Page 6 Figure 5 Duplex Installation (Optional) Figure 4 Duplex Installation (Standard) Figure 3 Simplex Installation...
- Page 7 C-5) Pump Body Leg Removal: D-2) Repair: It is advisable to remove the pump body legs if they NOTE: All item numbers in ( ) refer to Figure 7. are within one inch of the fl oor when the pump is in the operating position.
- Page 8 Figure 6...
- Page 9 Figure 7...
- Page 10 PARTS LIST BAF-6 P/N: 091550 ITEM QTY. PART NO. DESCRIPTION 090083 Moveable Fitting Assembly 090081 Moveable (Cast Iron, Class 30) 090085 O-Ring, 6.50 I.D. (Buna-N) 090088 Stationary Base Elbow Assembly 090087 Stationary Base Elbow (Cast Iron, Class 30) 090086 Guide Plug (Cast Iron, Class 30) 1-93-1 Sk.
- Page 11 OPTIONAL EQUIPMENT PARTS LIST INTERMEDIATE SUPPORT For 6” Disch. Pipe ITEM PART No. DESCRIPTION 090108 Intermediate Support Assembly 090094 Guide Rail Bracket (Stainless) 090086 Guide Plug (Cast Iron) 1-97-1 Hex Hd. Screw (.62-11 x 2.75 Lg. Stainless) 20-24-1 Split Lock Washer (.62 Stainless) 15-21-1 Hex Nut...
-
Page 12: Returned Goods
RETURNED GOODS RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”. CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR. Products Returned Must Be Cleaned, Sanitized, Or Decontaminated As Necessary Prior To Shipment, To Insure That Employees Will Not Be Exposed To Health Hazards In Handling Said Material. - Page 13 Notes...
- Page 14 Notes...
-
Page 15: Warranty Registration
Your product is covered by the enclosed Warranty. Complete the Warranty Registration Form and return to Crane Pumps & Systems, Inc. Warranty Service Group If you have a claim under the provision of the warranty, contact your local Crane Pumps & Systems, Inc. Distributor. - Page 16 FOLD HERE AND TAPE, DO NOT STAPLE PLACE STAMP HERE CRANE PUMPS & SYSTEMS, INC. WARRANTY SERVICE GROUP 420 THIRD STREET PIQUA, OHIO 45356 - U.S.A.
Need help?
Do you have a question about the Barnes BAF-6 and is the answer not in the manual?
Questions and answers