Table of Contents
Advertisement
Quick Links
Break Away Fitting for Submersible Pumps
IMPORTANT!
Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notifi cation.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
Manual Index
BARNES
BARNES
INSTALLATION MANUAL
Models: BAF-8 (Standard)
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
®
P/N: 076686
BAF-E8 (Non-Sparking)
P/N: 082110D
Form No. 082115-Rev. E
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crane BARNES BAF-8
Summary of Contents for Crane BARNES BAF-8
- Page 1 Read all instructions in this manual before operating pump. As a result of Crane Pumps & Systems, Inc., constant product improvement program, product changes may occur. As such Crane Pumps & Systems reserves the right to change product without prior written notifi cation.
-
Page 2: Safety First
Other brand and product names are trademarks or registered trademarks of their respective holders. ® Barnes is a registered trademark of Crane Pumps & Systems, Inc. 1998, 2002, 4/06, 9/06 Alteration Rights Reserved... - Page 3 Barnes representative or Crane Pumps & Systems, Inc., Service Department in Piqua, Ohio, telephone not lose or misplace it. (937) 778-8947 or Crane Pumps & Systems Canada Inc., B-3) Storage: Bramton, Ontario (905) 457-6223. This unit has been packaged and protected for shipping and indoor storage.
- Page 4 inches (mm) Figure 1...
-
Page 5: Section: C Installation
SECTION: C INSTALLATION C-5) Installation Descent Speed: C-1) Location: When lowering pump into wet well on the guide rails, do The Break Away Fitting Model BAF-8, when used in not exceed a descent speed of 3.2 inches per second or conjunction with Barnes Pumps 8”... - Page 6 Figure 2...
- Page 7 Figure 3...
- Page 8 Figure 4...
- Page 9 Figure 5...
-
Page 10: Parts List
PARTS LIST BAF-8 P/N: 082110 ITEM QTY. PART NO. DESCRIPTION 079680 Stationary Elbow Assembly 079326 Moveable 079907 Upper Guide Bracket 079909 Plug Rubber 079910 Threaded Disk 079911 Hex Hd Screw 7/16-14 x 3.25” Lg, Steel 002917 Cotter Pin 1.25” Dia. x 1.00” Lg 028864 Lock Washer 7/8”, Stainless... - Page 11 8” Intermediate Support Bracket P/N: 085034F For Steel Pipe 8.62” (219mm) O.D. Figure 6...
-
Page 12: Returned Goods
RETURNED GOODS RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”. CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR. Products Returned Must Be Cleaned, Sanitized, Or Decontaminated As Necessary Prior To Shipment, To Insure That Employees Will Not Be Exposed To Health Hazards In Handling Said Material. - Page 13 Notes...
- Page 14 Notes...
-
Page 15: Warranty Registration
Your product is covered by the enclosed Warranty. Complete the Warranty Registration Form and return to Crane Pumps & Systems, Inc. Warranty Service Group If you have a claim under the provision of the warranty, contact your local Crane Pumps & Systems, Inc. Distributor. - Page 16 FOLD HERE AND TAPE, DO NOT STAPLE PLACE STAMP HERE CRANE PUMPS & SYSTEMS, INC. WARRANTY SERVICE GROUP 420 THIRD STREET PIQUA, OHIO 45356 - U.S.A.
Need help?
Do you have a question about the BARNES BAF-8 and is the answer not in the manual?
Questions and answers