Download Print this page

Crane BARNES BAF-E3 Installation Manual

Break away fitting for submersible sewage pump

Advertisement

Quick Links

For Submersible Sewage Pump
IMPORTANT!
Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notifi cation.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
Manual Index
BARNES
BARNES
INSTALLATION MANUAL
Break Away Fitting
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
®
Series: BAF-E3
P/N: N014-00035
Form No. 105750-Rev. F

Advertisement

loading
Need help?

Need help?

Do you have a question about the BARNES BAF-E3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Crane BARNES BAF-E3

  • Page 1 Read all instructions in this manual before operating pump. As a result of Crane Pumps & Systems, Inc., constant product improvement program, product changes may occur. As such Crane Pumps & Systems reserves the right to change product without prior written notifi cation.
  • Page 2: Safety First

    Other brand and product names are trademarks or registered trademarks of their respective holders. ® Barnes is a registered trademark of Crane Pumps & Systems, Inc. 1998, 2002, 1/2006, 4/06, 9/06 Alteration Rights Reserved...
  • Page 3: Pump Specifications

    PUMP SPECIFICATIONS: MODEL BAF-E3 P/N: N014-00035 HARDWARE ...... 300 Series stainless steel. LOCATION: This BAF-E3 is designed for wet wells, O-RINGS ......Buna-N, 70 +/- 5 Duro. tanks, or lift stations classifi ed as Hazardous location Class GASKETS ......Rubber 1, Group D, Division 1 and/or non-hazardous locations, PAINT .........
  • Page 4 For the location of the nearest Barnes Service Center, pipe. check your Barnes representative or Crane Pumps & Systems, Inc., Service Department in Piqua, Ohio, telephone (937) 778-8947 or Crane Pumps & Systems Canada Inc., Bramton, Ontario (905) 457-6223. TABLE 1- ACCESS COVER DATA ACCESS COVER TYPE...
  • Page 5 FIGURE 5 Duplex Installation (Optional) FIGURE 4 Duplex Installation (Standard) FIGURE 3 Simplex Installation...
  • Page 6 C-4) Installing Pump To Break Away Fitting: D-2.1) Moveable Assembly: (See Figure 7) These instructions apply to all BARNES To install a new o-ring (5) in o-ring plate (7), completely pumps with a 125 lb. fl ange horizontal discharge on remove o-ring (5) and thoroughly clean groove recess in volute.
  • Page 7 FIGURE 6...
  • Page 8 FIGURE 7...
  • Page 9: Parts List

    PARTS LIST Non-Sparking P/N: N014-00035 ITEM PART NUMBER DESCRIPTION N014-00058 Guide Rail Cap Assy 625-02501 O-Ring - 220 2 per pump 625-01225 1.50” Guide Rail Pipe (Not Supplied with BAF) 11-82-6 Socket Hd Screw 1/2-13 x 1.50” Lg, Zp 625-02501 O-Ring - 220 014-00054 Guide Plug...
  • Page 10 RETURNED GOODS RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”. CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR. Products Returned Must Be Cleaned, Sanitized, Or Decontaminated As Necessary Prior To Shipment, To Insure That Employees Will Not Be Exposed To Health Hazards In Handling Said Material.
  • Page 11: Warranty Registration

    Your product is covered by the enclosed Warranty. Complete the Warranty Registration Form and return to Crane Pumps & Systems, Inc. Warranty Service Group If you have a claim under the provision of the warranty, contact your local Crane Pumps & Systems, Inc. Distributor.
  • Page 12 FOLD HERE AND TAPE, DO NOT STAPLE PLACE STAMP HERE CRANE PUMPS & SYSTEMS, INC. WARRANTY SERVICE GROUP 420 THIRD STREET PIQUA, OHIO 45356 - U.S.A.

This manual is also suitable for:

Barnes n014-00035