Light Diffusion Filter (Code A48Qfilter) - ProLights ArcPod 48VW User Manual

LIGHT DIFFUSION FILTER (CODE A48QFILTER)

1
1
2
3
4
5
WARNING: never touch the LEDs.
1. Remove the front cover (1) by loosing the screws. Then remove the front glass (2) and the rubber
seal (3). Place the light diffusion filter (4) on the lenses (5).
NOTE: to remove the light diffusion filter, reverse the procedure.
NOTE: it is recommended to tighten the front cover screws carefully so as to guarantee the correct
IP degree.
PROLIGHTS - ArcPod 48VW
Fig. 10
19