Accessories Installation; Lens (Code S27Qlens10-15-25-45) - ProLights ArcPod 48VW User Manual

10 - ACCESSORIES INSTALLATION

LENS (CODE S27QLENS10-15-25-45)

1
1
2
3
4
5
6
WARNING: never touch the LEDs.
1. Remove the front cover (1) by loosing the screws. Then remove the front glass (2), rubber seal (3),
lens holder (4) and the lens (5)
2. Replace the lenses by inserting the two pins on the back of the lens (DETAIL) with the holes pro-
vided on the PCB LED (5).
NOTE: to reassemble the lenses, reverse the procedure.
NOTE: it is recommended to tighten the front cover screws carefully so as to guarantee the correct
IP degree.
18
PROLIGHTS - ArcPod 48VW
DETAIL
Fig. 09