Multi Chemistry - Projecta INTELLI-CHARGE IC7 Manual

ADJUSTABLE CHARGE RATE
The charger's output can be adjusted to suit the size of the battery for optimum
charging.

MULTI CHEMISTRY

The Multi-Chem function allows you to set the charging profile to suit each battery's
chemistry type (Lithium, GEL, AGM, WET and Calcium). This ensures correct and
thorough charging and maximises battery performance and battery life.
POWER SUPPLY
When Power Supply mode is selected, you can safely run an appliance or load from
your battery. An appliance can also be run directly from the battery clamps if required,
for example using the charger as a memory saver when disconnecting the battery
from the vehicle.
WIRING HARNESS (IC7 ONLY)
The wiring harness allows for easy connection to vehicles that have hard to reach
batteries. Includes an inline fuse to protect the harness from accidental short circuits.
RUBBER END CAPS (IC7W ONLY)
Rubber end caps provide added durability and protection for workshop environments.
CHARGE STATUS INDICATOR
The CHARGING and FULLY CHARGED LEDs will illuminate and flash in various patterns
to indicate the different stages of charging. See below for flash patterns.
Desulphation
Red LED Power
Blue LED Charging
(Fast Flash)
Green LED Full
CHARGING LED: blue LED illuminates and flashes during charging process.
FULLY CHARGED LED: green LED illuminates (solid) when fully charged.
Absorption/
Soft Start Bulk Equalisation
(Slow Flash)
Analyse Recondition Float
5