Charging Cradle Connection - Pepperl+Fuchs OHV210-F229-B15 Manual

OHV210-F229-B15
Installation
2.
Pull the battery out of the handheld reader.
3.2

Charging Cradle Connection

Connecting the Charging Cradle
1.
Insert the micro USB plug of the cable into the micro USB connection on the bottom of the
charging cradle.
2.
Route the cable along the cable guide groove on the bottom of the charging cradle.
3.
Insert the USB plug on the connection cable into a free USB port on the PC. This step can be
carried out even during operation.
4.
Place the charging cradle in the table mount. The charging cradle can be attached to the table
mount using the two flat head screws supplied.
12
Note
When the charging cradle is placed in a table mount, the cable should come
through the hole on the back of the charging cradle.