Firmware Update - Pepperl+Fuchs OHV210-F229-B15 Manual

Handheld reader
Table of Contents

Advertisement

OHV210-F229-B15
Configuration
4.2.5

Firmware Update

Updating the Handheld Reader Firmware
1.
The handheld reader must be connected to the charging cradle. To do this, scan the quick
connect code on the front of the charging cradle.
A successful coupling is indicated by the handheld reader emitting two short beeps followed
by another beep and then vibrating. In addition, the radio indicators on both the handheld
reader and the charging cradle permanently light up green.
2.
Click on Upload new file to sensor or select Sensor > Update Firmware in the menu bar.
3.
Select a firmware file with the extension *.crvfw.
4.
The firmware file is transferred to the handheld reader. Uploading the firmware takes a few
minutes.
5.
Once the file has been transferred, the handheld reader automatically restarts.
The firmware is now updated. You can check the firmware version in the Sensor data sec-
tion. See chapter 4.2.3.
Updating the Charging Cradle Firmware
1.
Close Vision Configurator.
2.
Remove the battery from the handheld reader. This ensures that there is no connection to the
handheld reader.
3.
Start Vision Configurator and log in with your handheld reader (OHV210) (see chapter 4.2.1).
The product name of the charging cradle (1) is displayed in the application window under
"Device".
4.
Click on Upload new file to sensor or select Sensor > Make firmware update in the menu
bar.
5.
Select a firmware file with the extension *.crbfw.
6.
The firmware file is transferred to the charging cradle. Uploading the firmware takes a few
minutes.
7.
Once the file has been transferred, the charging cradle automatically restarts.
The firmware is now updated. You can check the firmware version in the Sensor data sec-
tion. See chapter 4.2.3.
Note
It is not possible to update the firmware when the battery is low. To ensure that
the firmware can be successfully updated, recharge the battery or replace it
with a charged battery.
Note
To update the charging cradle, it must not be connected to the handheld
reader.
1
25

Advertisement

Table of Contents
loading

Table of Contents