Inserting The Microsd Card (Optional) And Resetting The Camera - Lorex LNZ81P25 Series Instruction Manual

Hide thumbs Also See for LNZ81P25 Series:

Table of Contents

Inserting the microSD Card

(Optional) and Resetting the Camera

The camera features a hard reset button that is used to reset all camera settings back to the de-

fault values. This is useful in case you want to revert camera image settings back to the default

values.

To reset the camera:

1. Connect the camera as detailed in 3 Connecting the Camera, page 3. Make sure the camera

is powered on.

2. Loosen the service panel screws (x4), but do not remove them. Remove the service panel

cover.

3. The service panel allows you to perform the following:

• Insert a microSD card into the microSD card slot. For local recording, you can install a

microSD card up to 128GB. SanDisk™ or Kingston™ brand microSD cards are recom-

mended. microSD card Class 10 or higher required.

• Press and hold the reset button for 10 seconds to reset the camera to default settings

NOTE

It may take few minutes for the camera image to reappear on the screen.

#LX400116; r. 4.0/60127/60127; en-US

Table of Contents