Resetting The Camera - Lorex LNZ3522 Instruction Manual

9

Resetting the Camera

The camera features a hard reset button that is used to reset all camera set-
tings back to their default values. This is useful in case you've forgotten your
login information or to revert camera image settings back to their default
values.
To reset the camera:
1. Separate the camera from the mounting plate if needed and disconnect
camera cables.
2. Remove the 2 screws from the compartment cover on the camera base
using a Phillips screwdriver (not included).
#LX400043; r. 2.0/40122/40365; en-US
29