Table of Contents
Advertisement
4
Installation
4.1 Installation Tips & Warnings
WARNING
Make sure to install the camera in a location that can support the combined weight of the camera and wall
mount (weight: 11.7lb/5.3kg).
• Camera is rated for outdoor use. It is recommended to install the camera in a sheltered area,
such as under the eaves on a roof.
• It is recommended to install the camera as high up as possible to get the best possible image.
• Mount the camera where the lens is away from direct and intense sunlight.
• Plan your cable wiring so that it does not interfere with power lines or telephone lines.
• Ensure you adhere to local building codes.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible but out of reach.
NOTE
This camera includes all components required for wall mounting.
For the most up-to-date software and complete instruction manuals:
1. Visit
lorex.com.
2. Search for the model number of your product.
3. Click on your product in the search results.
4. Click on the Downloads tab.
4.2 Installation (Indoor / Outdoor)
CAUTION
•
Make sure to disconnect the power cable before installing the camera. Camera will begin moving immedi-
ately when power cable is connected.
•
Make sure to install the camera in a location that can support the combined weight of the camera and wall
mount (11.7lb/5.3kg).
To install the camera on a wall:
1. Attach the rubber ring to the back of the wall mount to ensure the weatherproof rating of the
camera.
2. Use the Allen key to attach the M6x14 screws (x3) to the wall mount. Do not tighten all the
way.
#LX400116; r. 4.0/60127/60127; en-US
7
Advertisement
Table of Contents
